The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They prevent vehicles from being started without a key fob. They also can be used to stop hotwiring and traditional forms of vehicle theft. However, more modern methods such as key replication and relay theft are becoming more widespread.
Designed to combat these recent trends The ghost immobiliser works to make your vehicle undetectable. It is silent and stealthy and does not use radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device, connects with the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA approved product, and insurance companies endorse it. It is virtually undetectable by thieves and operates quietly. It uses buttons on your steering wheel, center console and doors to create a unique pin code that must be entered before you are able to start your car. You can create up to 20 different sequences to increase security. It's easy to install and doesn't require any additional hardware.
It is recommended to choose an authorised immobiliser CAN installer who is specialized in the specific type of vehicle you have to ensure the most effective results. Ideally, they will have a workshop located in your local area to enable you to visit and have your installation completed. They'll also have a range of tools and materials to assist you with the installation process. These include hand tools, a multimeter and insulation tape, as well as heat shrink tubing to secure the connections. A user manual will give you instructions for the wiring in your vehicle.
Connect the battery prior to beginning the installation to avoid short circuits or airbag deployment. Double-checking the CAN L and CAN H wires is vital because a mistake in identification could lead to improper integration of the system. It is also a good idea to label or mark the wires. Make use of a multimeter to ensure that the power source is providing a constant 12V.
Advanced thieves can use various tactics to bypass Ghost Immobilisers, including blocking or spoofing. These methods are based on amplifying the signal that is transmitted from your key fob to the vehicle's electronic control unit. With advanced anti-jamming technologies and constant monitoring, your vehicle can be protected from these sophisticated attacks.
Security enhancing
A ghost immobiliser provides an additional layer of protection to your car against theft. It is an PIN code protection system that is activated by pressing buttons on your steering wheel or dashboard which makes it difficult for thieves to gain access the device and take your vehicle. The device is designed to be hidden within your vehicle. It does not have LEDs, or other signals to alert potential burglars to its presence. It communicates directly with the ECU of your vehicle via the data bus. This means that it is not vulnerable to hacking or relay attacks.
It is a great investment for those who have prestige cars which are at greater risk of theft because of their price and popularity. ghost 11 immobiliser enhanced features of the system protect your car from key duplicates and ECU swapping. Some ghost immobilisers can also be connected to an app, allowing you can easily arm and dearm them. They also come with the option of a service/valet mode, which allows you to temporarily deactivate them while your vehicle is being serviced or repaired.
Ghost immobilisers also have a excellent feature that it doesn't require any wire cutting. This is a great option, particularly if you have a newer car that doesn't have built-in immobiliser technology. Some systems can also integrate with GPS tracking devices, adding an extra layer of security to your vehicle. The use of a GPS tracker can help you reduce your insurance premiums. If you opt to buy an immobiliser for ghosts be sure it is TASSA verified and that a professional installer installs it for you.
Compatible with all major models and brands
The Ghost Immobiliser has been designed to work with all major brands and models of vehicles protecting your vehicle from theft. It generates a unique pin number using buttons on your steering wheel, console or door panels. You must enter this code before you can drive. It is tamper-proof and undetectable. It is also backed by three-year warranty. It is also fully endorsed by insurance providers. This means you can reduce your cost of insurance.
The Ghost system is different from traditional immobilisers that rely on the key fob to provide ignition control. It is directly connected to the engine controller via the CAN bus. It is virtually impossible to remove, disable or hack. The Ghost system can also be linked to an iPhone app to allow remote monitoring and management.
You can set an PIN code that is simple for you to remember but mathematically, it is impossible for thieves to determine. The PIN can be personalized and changed at any time so that you can ensure your vehicle is secure even if it's parked on the street or in a parking lot. You can also select a valet or service mode if someone else needs to drive your vehicle temporarily for instance, when it's in the garage. This feature will also help prevent your car from being taken by a shady mechanic. For added peace of mind you can select a Ghost call alert to inform you when your car is in motion or if it's moved.
Convenience
The ghost immobiliser shields your vehicle from common theft methods such as key replication or relay attacks. It is activated by connecting to the vehicle's CAN data network and preventing communication with the engine ECU. This system makes it difficult for thieves to hack or replicate your vehicle.
Installed, you'll need to enter a PIN of up to 20 digits long using the buttons on the dashboard as well as the steering wheel to start the car. The system is completely hidden, and therefore undetectable by thieves. It doesn't emit radio frequency signals. It is also able to be set to an individual-changeable PIN code which adds security. The system is designed to stop cutting the circuit, making it nearly impossible to tamper.
If you get lost in your PIN, there are some systems that allow you to communicate with the immobiliser using an app on your smartphone and instantly disarm it. Some even have a service/valet mode that allows you to start your car temporarily, for instance, when you need to drop it off for maintenance or valet parking.
The Ghost Immobiliser is also unnoticeable to thieves as it does not transmit radio signals, which is a significant benefit over other aftermarket car security systems. Additionally, it is easy to use and doesn't require any wiring that is complicated. You can also use it in conjunction with a dash cam to provide added safety. Dash cams include the Thinkware F70, which features clear and sharp HD dashcam footage in 1080p HD and Format Free Technology and parking mode. The system can also be hardwired for optimum performance and durability.
Installation
It is crucial to select the best immobiliser ghost to shield your vehicle from thieves. This device can stop car thefts by blocking communication between key fobs and the engine controller unit. This device stops thieves from stealing the signal used to start your vehicle. It can also detect any signs of manipulation and notify the owner of the vehicle.
The device is easy to install and works with the existing systems of your vehicle. It does not require any modification to the vehicle wiring and can be placed in a hidden place, like under the dashboard. Follow the steps in the manual to make sure that the device is installed correctly. It is also crucial to test the system after installing it. This will ensure that the immobiliser ghost is working as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed on your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to take it off or bypass the system. The installation process generally takes about 2 hours.
It is recommended that you review the wiring diagram for your vehicle during the installation process. This will help you identify the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. It is also important to verify the connections to ensure that they are safe and well-insulated.
Once the installation has been completed, you can begin using the Ghost Immobiliser as normal. It will disable the ignition of your vehicle in the event that it isn't started with the correct PIN code which you can create yourself. The ghost immobiliser cost can also be put into Service/Valet mode in the event that you need to hand over your vehicle for maintenance or valet parking.